Quick Answer: For footwear entering the EU, REACH is an information duty, not a certificate a factory can hand over. What EU buyers should ask for is a written material declaration per component, a screening of every input against the current SVHC candidate list, and third-party reports for the substances the importer names. The threshold that triggers an Article 33 communication is 0.1% by weight in an article. Ask before sample approval, not after the cartons are packed.

In this guide:

REACH Is a Duty, Not a Certificate

The single most useful correction we can offer an EU buyer is that there is no such thing as a REACH certificate. REACH is Regulation (EC) No 1907/2006, a framework of duties covering registration, evaluation, authorisation and restriction of chemicals. When an enquiry arrives asking for "your REACH certificate", the honest answer is that the document does not exist, and a supplier who prints one on a letterhead has not made the shipment compliant. The obligation sits on the importer placing the goods on the EU market. What a non-EU supplier can do is supply accurate information about the substances in each article, and support the testing the importer specifies. Our supplier verification guide covers how to check that distinction.

Who Carries the Obligation

Split the responsibility before you split the paperwork. The EU importer or brand owner is the duty holder for placing a compliant article on the market and for any registration that falls to it. The non-EU manufacturer is not the registrant, but it is the only party that knows what went into the upper, the sole, the print and the adhesive, so it carries a practical information duty down the supply chain. Under Article 33 a supplier must pass on enough information when a listed substance is present above the threshold, Ask each side to state in writing which role it holds. Our guide to auditing a factory without flying shows how to request that evidence remotely.

What to Ask For vs Answers That Tell You Nothing

Most compliance gaps begin with a vague reply that nobody challenges. The left column is the line on the brief; the middle column is the kind of answer that sounds reassuring but carries no usable information; the right column is the specific request to put instead. None of the right-hand items is a claim that any supplier already holds them. Ask for each line to be answered with a named document or marked as outstanding.

Line on the briefAnswer that tells you nothingWhat to request instead
Overall status"REACH compliant" on a letterheadA signed declaration naming the regulation and the responsible party
Material breakdownA single word such as "EVA"A component list: body, sole, print, adhesive, trim
SVHC screening"No SVHCs" with no dateScreening against the current candidate list, with its version date
Restricted substancesA generic "pass"Named Annex XVII entries relevant to each material family
Third-party reportsAn old report for a different styleReports for the named substances on the approved sample
Change controlNo answer at allWritten notice if a material, print or supplier changes

The SVHC List and the 0.1% Threshold

The candidate list of substances of very high concern is maintained by the European Chemicals Agency and updated roughly twice a year, so a screening is only meaningful if it names the version date. The 0.1% figure is a weight-per-weight concentration in an article, not an average across a whole shipment or a whole shoe, and it is the trigger for the Article 33 duty to communicate information down the chain, not a ban. Ask the supplier to state the list version used, which articles were screened, and how the result was reached. A declaration against an older list is not an answer to a current order. Put the version date on the freeze list so a reorder shares the same baseline.

A Component-by-Component Risk Map

A shoe is an assembly of inputs, and a compliance question addressed to "the shoe" is too coarse to answer. Work down the bill of materials instead. A one-piece injection moulded EVA body has a short input list with no midsole seam and no glue line, which makes the declaration simpler to write. A printed slide adds an ink system, a rain boot adds a plasticiser question, and a metal buckle or crystal trim adds a hardware question. Ask for one line per input, not one line per style. The garden clog is the short-list case; printed and hardware-heavy styles need longer lists.

The Documents to Request

Ask for a defined set, in writing, tied to the approved sample. Three items belong at the top of the list, and each should be dated and traceable to a specific style and colourway:

  • A component and material declaration naming each input and its supplier, with the candidate-list version used for screening.
  • Third-party reports for the substances the importer specifies, issued on the approved sample by a laboratory the importer names.
  • A change-control note committing the supplier to written notice before any material, print or sub-supplier changes.

We do not claim certificates or reports we cannot show. Tell us which documents the importer needs for the destination market and we will state plainly what we can provide and what the buyer must arrange.

How We Plan This Run From the Factory Side

From our side of the desk the order is a sequence of named inputs, not a slogan. We read the product sheet, then resolve each component to a material and a supplier, then record which lines need a declaration and which need a laboratory report from the importer. We book the print, adhesive and trim sources against the 600-pair minimum per colour, hold the approved sample as the reference, and set packing to one pair per polybag and 30 pairs per carton. We have worked this way for 12 years, across 60+ countries, with 500+ SKUs and 5 million pairs shipped, from Room 2103, No. 22 Xingqian Road, Jimei, Xiamen.

Annex XVII Restrictions and SCIP Notification

Two things are often folded together and should not be. Annex XVII is the list of restrictions: it sets limits or bans on named substances in named articles, covering families relevant to footwear such as certain azo dyes, phthalates, nickel release, lead, cadmium and polycyclic aromatic hydrocarbons. A restriction is a hard limit, unlike the 0.1% communication threshold. SCIP is a separate database duty under the waste framework, requiring a notification for articles containing a candidate-list substance above that threshold. Ask which Annex XVII entries apply to the material families in the order, and clarify who will file the SCIP notification, because that duty sits with the EU-side operator rather than the exporter.

Kids and Printed Styles Deserve a Closer Look

Children's footwear and heavily printed styles are where a generic declaration falls apart fastest. Our kids range is graded in two runs, 24#-29# and 30#-35#, and each printed style carries an ink system that should be named on the material list rather than hidden under the word "print". The printed kids slipper and the navy-print rain boot both make the point: the body is one input, the print is another. The kids series shows why one line per style cannot cover them. Ask for the print supplier, the ink family and a report on the approved printed sample.

Where Buyers Get This Wrong

The same three mistakes appear on most first compliance enquiries, and none of them is a chemistry problem. Each is a line missing from the brief, cheap to close before a deposit and expensive to close once cartons are packed. Check your own sheet for these:

  • Asking for a "REACH certificate" and accepting a letterhead statement in place of a component declaration.
  • Accepting an undated screening or a report issued for a different style, colourway or material.
  • Raising the substance questions after sample approval, when a material change moves the ship date.

Writing Compliance Into the Order

Production runs 25-35 days after deposit and sample approval, quoted FOB Xiamen or EXW, so the compliance brief has to close inside that window. Mixed containers are routine and a first order can carry two or three styles to test a market, but each style needs its own material declaration. Our contact page is the route for sending the brief, and Nicky Chen at [email protected] handles it through to packing. Three lines to close before the clock starts:

  • Every style and colourway in scope, each with a named component list and candidate-list version date.
  • The named substances, the laboratory and the approved sample each report must refer to.
  • The change-control commitment and the party responsible for the EU-side notification.

FAQ

Can you provide a REACH certificate?

No such certificate exists. REACH is a set of legal duties, not a certification scheme. We can provide a written material declaration and support the testing the importer specifies, and we will state plainly what we can and cannot supply.

Do you supply SVHC test reports?

We do not claim reports we cannot show. Tell us which substances and which laboratory the importer requires, and we will arrange for the approved sample to be submitted, or state clearly what the buyer must commission.

Is 0.1% a ban on the substance?

No. It is the concentration in an article that triggers the Article 33 duty to communicate information. Restrictions under Annex XVII are separate and may set different limits, so ask for each to be addressed on its own line.

Who files the SCIP notification?

The EU-side operator placing the article on the market. We supply the component and substance information that notification needs; we do not file it on the importer's behalf.

Does one declaration cover a mixed first order?

No. Mixed containers are routine, but two or three styles mean two or three component lists, each tied to its own approved sample. Keep the candidate-list version date identical across them so the set can be read together.

Send the artwork and your target retail price and we will come back with a mould, a print method and a landed cost.